Single Point Hanging Wall Cladding System
Specifications Of Stone Wall Panels
This Single Point Hanging technique is an affordable exterior wall cladding system. Slabs can be either fixed with a hole or thanks to “kerf” and “slot” milling procedures. This system should be suitable for mechanical fixing of （over）25mm thick natural stone slabs which improve anti-seismic ventilated walls.
According to customer’s design needs, PFM flooring tiles come in 120×60 x2.5cm（48″x24″x1″), 60x60x2.5cm (24″x24″x1″ ), 60x30x2.5cm (24″x12″x1″ ), This external wall cladding system is different from the other traditional dry hanging technologies. There is no metal frame on the back, or perforations on the side of the slab.
SUITABLE FOR SIZES
Description Of Single Point Hanging System
The Single Point Hanging structures must be able to bear the loads transferred to the brackets, therefore, walls using compact materials are generally more suitable.
Drilling hole in the concrete wall directly and installing the hook in the hole. Then, the pin is inserted the perforations on the side of the slab and connected to the hardware on the wall.
In addition to the obvious aesthetic and functional advantages, the installation scheme of point-mounted system can effectively reduce the engineering cost in practice. Usually it is applied to small areas, low level floors and indoor installations.
PFM Stone Material Recommended